Board Track Bars for Motorized Replica Racers

Here ya go. you choose, 7/8″ (standard bicycle) or 1″ bars.

Dimension will be 18″-19 inches wide on the 90 degree ones and have 7″ of straight section for grips and levers. 45 and 60 degree ones will be wider. Email for info HughesMotorized@gmail.com

Board Track Replica Handlebars $50 Plus Shipping
Board Track Replica Handlebars $50 Plus Shipping

I’ll bend up a 36″ piece of steel tubing and weld a shim on the 7/8″ bars so they fit into the goose neck / stem clamp. The 1″ piece will be a little on the rough side but it will work just fine. 1″ bars will come without the shim so you can figure that one out.

1" OD Board Track Racer bars
1″ OD Board Track Racer bars

You choose from 90 degree bend like shown below or 60 or 45 degree.

Green & White Indian Board Track Racer
45 Degree Bars Shown

Dimension will be 18″-19 inches wide on the 90 degree ones and have 7″ of straight section for grips and levers. 45 and 60 degree ones will be wider. Email for info HughesMotorized@gmail.com

Board Track Replica Handlebars $50 Plus Shipping
NOTE: Approximate Dimension shown

Click below to purchase.

Dimension will be 18″-19 inches wide on the 90 degree ones and have 7″ of straight section for grips and levers. 45 and 60 degree ones will be wider. Email for info HughesMotorized@gmail.com


Choose One